Led spacer support is widely used in video tube and display products. It is used as RGB spacer and adopts 2R1G1B mode. In the 21st century, LED products are developing rapidly, and the demand for LED spacer supports is becoming more and more complex. In order to cooperate with LED lamps, the spacer support height is generally 0.5mm as a benchmark, which is divided into 50 different heights from 1mm to 25mm, making the LED spacer support products extremely diverse.
The service environment of LED spacer requires high insulation, so it is generally made of PA66 raw materials, which meets the European ROHS standard; According to the shape, it is mainly divided into double pit spacer support, circular spacer support and square spacer support.
Double pit spacer support
Double pit spacer support, one type of LED spacer support, with one slot on the left and right sides for diode pin compression. It is mainly used to protect the LED standing on the PC board, the pin will not be bent or broken, and make the LED height consistent, free of fixture, complete size and no space. Fast and beautiful assembly.
Circular hole spacer support
Circular hole spacing column, also known as circular isolation column. The pins shall be inserted into the two square holes reserved for the spacer support and shall not be exposed. It is mainly used to make the LED stand on the PC board with the same height, without touching feet and short circuit.
Square hole spacer support
Square hole spacing column, also known as LED square seat. The pin is bent 90 degrees with the LED lamp to facilitate installation under special circumstances. It is mainly used to make the LED stand on the PC board at 90 °, with consistent height, constant foot, no short circuit, neat and beautiful.
For more product information, please go to the official store website of Heying on alibaba. Thank you.